User`s guide
Table Of Contents
- E-Designer Reference Manual
- 1 Installation
- 2 General
- 3 Configuration with the Configuration Tool
- 3.1 Starting the Configuration Tool
- 3.2 Selecting Menu Language
- 3.3 Creating a Project
- 3.4 Saving a Project
- 3.5 Updating Drivers
- 3.6 Changing Project Properties
- 3.7 The Project Manager
- 3.8 The Block Manager
- 3.9 Showing Operator Panel around the Working Area
- 3.10 Configuration of Blocks
- 3.11 Using Text Blocks
- 3.12 Static Symbols
- 3.13 Changing I/Os
- 3.14 The I/O Browser
- 3.15 Changing BDTP Station
- 3.16 I/O Cross Reference
- 3.17 Other Managers/Editors
- 3.18 The File Menu
- 3.19 The Edit Menu
- 3.20 The View Menu
- 3.21 The Functions Menu
- 3.22 The Setup Menu
- 3.23 The Block Manager menu
- 3.24 The Object menu
- 3.25 The Layout Menu
- 3.26 The Project Menu
- 3.27 The Transfer Menu
- 3.28 The Window Menu
- 3.29 The Help Menu
- 4 Graphic Presentation and Maneuvering
- 5 Text-based Presentation for Printouts and Reports
- 6 Trends
- 7 Message Library
- 8 Alarm Management
- 9 Recipes
- 9.1 Calculation of Recipe Size
- 9.2 Recipe Properties and Recipe Directory
- 9.3 Creating a Recipe with the Operator Panel
- 9.4 Appending Recipes
- 9.5 Transferring Recipes to the Controller
- 9.6 Deleting Recipes
- 9.7 Using Recipes in a PC
- 9.8 Creating and Transferring Recipes with the Controller Program
- 9.9 Saving Individual Recipes on an External Memory Card in Runtime
- 10 Data Logger
- 11 Passwords
- 12 Printouts from the Operator Panel
- 13 Time Channels
- 14 Language Management
- 14.1 Unicode in the Operator Panel
- 14.2 Creating Additional Application Languages
- 14.3 Translating/Editing Texts in the Configuration Tool
- 14.4 Properties for the Application Language
- 14.5 Export
- 14.6 Import
- 14.7 Show Index
- 14.8 Cross Reference
- 14.9 Reuse Index
- 14.10 Font Templates
- 14.11 Unicode in E1012 and E1022
- 15 System Monitor
- 16 Index Addressing
- 17 Communication
- 18 Network Communication
- 19 Network Functions in the Operator Panel
- 20 LEDs
- 21 Function Keys
- 22 Macros
- 23 Project Transfer
- 24 Transfer of Controller Program and Parameters
- 25 Updating the Operator Panel
Function Keys
Mitsubishi Electric, MA00759F 293
21.2 Jump to Block with Function Keys
This function makes it possible to use function keys to jump to blocks without
having to use a Display signal. Select Jump to block from the list when a local or
global key is defined.
Changing blocks using function keys is the quickest way of changing blocks, and
does not occupy digital signals in the controller.
Jump to info block con-
nected to the alarm
Jumps to a block linked to the alarm. Applies to the
selected alarm line or in the alarm list.
See the chapter Alarm Management for further informa-
tion.
List alarm groups Selects from which alarm group the alarm should be
shown in the alarm list.
Saves alarm list to
memory card
Copies the alarms in the operator panel to a USB memory
stick. See the chapter Alarm Backup for further informa-
tion.
Return to previous block Shows “previous block” functions in nine levels back-
wards. When block 0 is shown it is not possible to jump to
the previous block with this function. Block jumps cannot
be made with this function if logon is made at a higher
security level than the current level.
Jump to main block (block
0)
Shows the start block, block number 0.
Shows object info Used in the alarm block to display detailed information
about alarms. See the chapter Alarm Management for
further information.
Enter Corresponds to pressing the Enter key.
Show diagnostic page Shows the diagnostic page for the operator panel. See
section Diagnostic Page for further information.
TCP/IP Connect* Initiates connection during serial TCP/IP connection.
TCP/IP Disconnect* Disconnects serial TCP/IP connection.
* Not available for E1012 and E1022.
Function Description