User`s guide

Recipes
Mitsubishi Electric, MA00759F 177
When Using Recipe Names of up to 8 Characters
By double-clicking Setup of recipe signals in the Project Manager the first register in
the control block is defined. This and the 7 following registers are used as control reg-
isters. The control block is described in the following table.
Register Content Description
Control register 0 Command Command register set by the controller.
Available commands:
0: No command.
1. Save recipe to operator panel.
2. Read recipe from operator panel.
3. Delete recipe from operator panel.
4. Create recipe directory.
5. Change recipe directory.
6. Delete recipe directory.
Control register 1 Handshake Handshake register set by operator
panel.
0. Ready for new command.
1. OK
2. Recipe file write error.
3. Recipe file not found.
Control register 2 File name characters 1-2
Name of recipe file/recipe directory in
the operator panel.
Control register 3 File name characters 3-4
Control register 4 File name characters 5-6
Control register 5 File name characters 7-8
Control register 6 Start data register The first data register to be read/
written to/from recipe file.
Control register 7 Number of registers Number of registers to be read/written
to/from recipe file.