User`s guide

Recipes
174 Mitsubishi Electric, MA00759F
9.4 Appending Recipes
The function Append recipe can be linked to function and touch keys and makes it
possible to add signals and their values from the current block to an existing recipe
in the operator panel. This entails that the operator can save signals and their
values from several different blocks in a joint recipe. New signals are added to a
recipe, and signals already existing in the recipe will be updated when the function is
activated. The name of the recipe to which the current block’s signals and their values
are to be added is specified when the function or touch key for Append recipe is
pressed. When appending a recipe, the options Replace existing or Save as new are
available. If Replace existing is selected all existing recipes are listed, and the user se-
lects which recipe to replace. When selecting Save as new, the user enters the recipe
name. If the function is activated and there are no recipes saved in the operator
panel, a new recipe will be created in the operator panel. Similarly, a new recipe will
be created if the same recipe directory for the block is not given. To add signals from
another block to a recipe the same, or no recipe directory, must therefore be given for
both blocks.
Note:
If a string is added to an existing recipe with strings, the strings must be separated by
address space. Otherwise the previous near string will be increased.