User`s guide
Table Of Contents
- E-Designer Reference Manual
- 1 Installation
- 2 General
- 3 Configuration with the Configuration Tool
- 3.1 Starting the Configuration Tool
- 3.2 Selecting Menu Language
- 3.3 Creating a Project
- 3.4 Saving a Project
- 3.5 Updating Drivers
- 3.6 Changing Project Properties
- 3.7 The Project Manager
- 3.8 The Block Manager
- 3.9 Showing Operator Panel around the Working Area
- 3.10 Configuration of Blocks
- 3.11 Using Text Blocks
- 3.12 Static Symbols
- 3.13 Changing I/Os
- 3.14 The I/O Browser
- 3.15 Changing BDTP Station
- 3.16 I/O Cross Reference
- 3.17 Other Managers/Editors
- 3.18 The File Menu
- 3.19 The Edit Menu
- 3.20 The View Menu
- 3.21 The Functions Menu
- 3.22 The Setup Menu
- 3.23 The Block Manager menu
- 3.24 The Object menu
- 3.25 The Layout Menu
- 3.26 The Project Menu
- 3.27 The Transfer Menu
- 3.28 The Window Menu
- 3.29 The Help Menu
- 4 Graphic Presentation and Maneuvering
- 5 Text-based Presentation for Printouts and Reports
- 6 Trends
- 7 Message Library
- 8 Alarm Management
- 9 Recipes
- 9.1 Calculation of Recipe Size
- 9.2 Recipe Properties and Recipe Directory
- 9.3 Creating a Recipe with the Operator Panel
- 9.4 Appending Recipes
- 9.5 Transferring Recipes to the Controller
- 9.6 Deleting Recipes
- 9.7 Using Recipes in a PC
- 9.8 Creating and Transferring Recipes with the Controller Program
- 9.9 Saving Individual Recipes on an External Memory Card in Runtime
- 10 Data Logger
- 11 Passwords
- 12 Printouts from the Operator Panel
- 13 Time Channels
- 14 Language Management
- 14.1 Unicode in the Operator Panel
- 14.2 Creating Additional Application Languages
- 14.3 Translating/Editing Texts in the Configuration Tool
- 14.4 Properties for the Application Language
- 14.5 Export
- 14.6 Import
- 14.7 Show Index
- 14.8 Cross Reference
- 14.9 Reuse Index
- 14.10 Font Templates
- 14.11 Unicode in E1012 and E1022
- 15 System Monitor
- 16 Index Addressing
- 17 Communication
- 18 Network Communication
- 19 Network Functions in the Operator Panel
- 20 LEDs
- 21 Function Keys
- 22 Macros
- 23 Project Transfer
- 24 Transfer of Controller Program and Parameters
- 25 Updating the Operator Panel
Graphic Presentation and Maneuvering
124 Mitsubishi Electric, MA00759F
The Multiple Choice Object
Place the cursor on the object and press [ENTER]. A list of options will now be
shown with all maneuverable statuses. Stepping to the required status and pressing
[ENTER] will set the analog signal linked to the object to this status.
The Analog Numeric Object
Enter the value and press [ENTER] to maneuver numeric objects. If the value en-
tered is too high or too low, the indicated maximum or minimum values for the ob-
ject will be shown. This information is also shown if pressing [ENTER] when the
object is maneuverable.
The Analog Numerical Table Object
Pressing [ENTER] when the table object is selected will select the first cell in the ta-
ble. Use the arrow keys to move the cursor between cells. Change the value for the
marked cell and press [ENTER].
The Slide Object
The object is maneuvered with the arrow keys by placing the cursor on the object and
pressing [ENTER]. The value can now be increased or decreased with the arrow keys.
Finish with [ENTER]. The value is increased/decreased with the number
corresponding to the Scale ticks in the object. Finish with [ENTER].
The object can also be maneuvered with the functions Increment and Decrement,
on the assumption that they are linked to the function keys, see the chapter Function
Keys.
The Bar Graph Object
The min/max indicators for bar graphs can be set to the current value (reset) by
pressing [ENTER] when the cursor is placed on the object.
For operator panels with touch screens the min/max indicators are reset when point-
ing at the bar graph.