Installation manual
Table Of Contents
- Foreword
- 1 Safety Precautions
- 2 Installation
- 2.1 Space Requirements
- 2.2 Installation Process
- 1. Unpack and check the delivery. If damage is found, notify the supplier.
- 2. Place the panel cut out where the operator terminal is to be situated, draw along the outer sides of the holes and cut according to the markings.
- 3. Secure the operator terminal in position, using all the fastening holes and the provided brackets and screws:
- 4. Connect the cables in the specified order.
- 5. Carefully remove the laminated film over the operator terminal display, to avoid static electricity that could damage the terminal.
- 2.2.1 Mode Switches
- 2.2.2 Connections to the Controller
- 2.2.3 Other Connections and Peripherals
- 3 Technical Data
- 4 Chemical Resistance
- 5 Operator Terminal Drawings
Table of Contents
Mitsubishi Electric, MA00779
Table of Contents
1 Safety Precautions............................................................................. 1-1
1.1 UL Installation............................................................................... 1-1
1.2 General .......................................................................................... 1-1
1.3 During Use .................................................................................... 1-1
1.4 Service and Maintenance................................................................ 1-2
1.5 Dismantling and Scrapping............................................................ 1-2
2 Installation ....................................................................................... 2-1
2.1 Space Requirements ....................................................................... 2-1
2.2 Installation Process......................................................................... 2-1
2.2.1 Mode Switches ............................................................................................... 2-3
2.2.2 Connections to the Controller........................................................................ 2-3
2.2.3 Other Connections and Peripherals ................................................................ 2-3
3 Technical Data ................................................................................. 3-1
4 Chemical Resistance ......................................................................... 4-1
4.1 Metal Casing.................................................................................. 4-1
4.2 Keyboard and Display.................................................................... 4-1
4.2.1 Autotex F250.................................................................................................. 4-1
4.2.2 Touch Screen Surface ..................................................................................... 4-2
5 Operator Terminal Drawings ........................................................... 5-1
5.1 Communication Ports.................................................................... 5-1
5.2 E1101 Outline............................................................................... 5-2