Specifications

5 - 27
Continued from the previous page
5) After the "Device write" screen appears, input any
numerical value to "Setting value" and click the
Set
button.
Set D0 to 100 in this case.
6) Click the Close
button on the "Device write"
screen to close the screen.
Continued to the next page
7) Set the program to active (*1) and check that the
value of device is changed.
When repeating the operations of 4) to 5) and
changing the value of D0 to D4, the value D0 to D4
on the program is changed.
*1 Display on the top of the windows.