Specifications

5 - 26
(3) Check of device status of D0 to D4
The numerical value changed by the MX Component is checked in a program. (*1)
*1 The following can be processed using X7 to XB of the demonstration machine
and the display.
X7 : Store "0" in D0 to D4
X8, X9 : Store any numerical value in D0 to D4
XA : Display the numerical value of D0 to D2
XB : Display the numerical value of D3 to D4
1) Click [Start]
[All Programs] [MELSOFT
Application]
[MX Component] [PLC Monitor
Utility].
2) After the "Transfer setting" screen appears, set
"Logical station number" to "1" and click the OK
button.
3) "PLC Monitor Utility" starts up. Then set "Device"
to "D0" and click the Monitor start
button.
Continued to the next page
4) After the devices appear, double-click the device
column for changing a value.
When changing the values of D0 to D4 (*1), D0 to
D4 on the program is changed.
*1 Input the value with the format designated in the
screen.