Specifications

5 - 25
Continued from the previous page
4) Click the Open
button to open the
communication line.
When opening normally, "Communication line was
opened normally." appears in Communication
status.
The error code appears at abnormal.
For details of error code, refer to Appendix 2.3.
5) When opening normally, the Monitor start
button
becomes active. Then click the button to start
monitoring.
6) Check that the bit device status on the program
varies depending on turning ON or OFF the X0 to
X7 switch of the I/O panel.
Also, check the contents of the word devices (D0
to D4).