Specifications

5 - 14
Continued from the previous page
3) Click the Wizard
button.
4) After the screen shown on the left appears, set
"Logical station number" to "1" and click the
Next>
button.
5) As the setting on the personal computer side is
performed, set the following contents and click the
Next>
button.
PLC side I/F : Ethernet board
Connect module : QJ71E71
Protocol : TCP
Network No. : 1
Station No. : Set the station No. of each
demonstration machine. (1 to 5)
Time out : 10000ms (For monitoring
response receiving)
Continued to the next page
6) As the setting on the PLC side is performed, set
the following contents and click the Next>
button.
PLC side I/F : Ethernet module
Module type : QJ71E71
Host (IP Address) : Set IP address of each
demonstration machine
(192.168.1.101 to
192.168.1.105)
Network No. : (1)
Station No. : Set the station No. of each
demonstration machine
(11 to 15)