Specifications

5 - 10
5.2.4 Parameter write
The set parameters are written to the PLC CPU.
1) Click
.
(Write to PLC)
2) Click the Param+Prog
button on the "Write to
PLC" dialog box and select "MAIN" of Program
and "PLC/Network/Remote" of Parameter.
3) Click the Execute
button to write the parameter.
4) When the write is completed, the screen shown on
the left appears. Click the OK
button.
5) Click the Close
button to close the "Write to
PLC" dialog box.
Reset the PLC CPU to make the written
parameters valid.
This completes the parameter write.