Specifications

5 - 9
5.2.3 Transfer setup
Transfer setup is performed to write a parameter to the PLC CPU.
1) Click the [Online]
[Transfer setup] menu.
2) Confirm the following settings on the "Transfer
Setup" screen.
"PLC side I/F" : "Serial USB"
"PLC side I/F" : "PLC module"
"Other station" : "No specification"
Clicking "Connection test" can confirm whether or
not there is any problem in the connection status
or transmission specification settings.
Perform the test operation as required.
3) Click the OK
button.
This completes the transfer setup.