Specifications

5 - 7
Continued from the previous page
6) Set the following contents, click the End
button,
and then close the "Ethernet operations" dialog
box. (Set 192.168.1.101 to 192.168.1.105 for IP
address.)
Communication data code : Binary code
Initial timing :
Do not wait for OPEN
IP address : Set the IP address of
each demonstration
machine.
(192.168.1.101 to
192.168.1.105)
Send frame setting : Ethernet (V2.0)
Enable Write at RUN time : Enable
7) Click the Open settings button to display the
network parameter Ethernet open settings screen.
8) Set the following contents.
Protocol : TCP
Open system : MELSOFT connection
Designating MELSOFT connection enables access
to the PLC CPU from other MELSOFT products at
a time.
9) Click the End
button to close the network
parameter Ethernet open settings screen.
Continued to the next page
10) Click the End
button to close the "Network
parameters Setting the number of MNET/10H
Ethernet cards" screen.