Specifications

5 - 6
5.2.2 Network parameters setting the number of MNET/10H Ethernet cards
Ethernet parameter setting is performed for connecting to Ethernet.
1) Double-click "Network parameter" from the project
data list.
2) After the network parameter selection dialog box
appears, click the MELSECNET/Ethernet
button.
3) The Network parameters Setting the number of
MNET/10H Ethernet cards screen appears.
4) Set as follows.
Network type : Ethernet
Starting I/O No. : 00A0
Network No. : 1
Group No. : 0
Station No. :
Set the station No. of each
demonstration machine (11 to 15)
Mode : Online
Continued to the next page
5) Click the Operational settings
button to display
the "Ethernet operations" dialog box.