Specifications

5 - 4

5.2 Parameter Settings and TCP/IP Settings for PC

The parameters of the Ethernet module on the PLC CPU side are set using the GX

Developer before the communication with a personal computer.

The TCP/IP settings for the personal computer to which the MX Component is installed

are also performed.

The setting details should be the same as those of Section 5.1.

5.2.1 GX Developer startup and multiple CPU settings

For the multiple CPU settings and the Ethernet parameter settings on the PLC CPU

side, the GX Developer is started up.

1) Click [Start]

[All Programs]

[MELSOFT Application]

[GX Developer].

fter the GX Developer starts up, click the [Project]

[New project] menu.

Continued to the next page

3) As Q02HCPU is used in this exercise, set "PLC

series" to "QCPU (Q mode)" and "PLC Type" to

"Q02(H)" and then click the OK

button.