Specifications

4 - 17
4.7.2 Hardware test
The hardware test is performed to confirm that RAM and ROM of the Ethernet module
are normal.
The operation procedure of the hardware test is the same as that of the self refrain
test.
Set "H/W test" for "Mode" in the Network parameters Setting the number of MNET/10H
Ethernet cards screen.
(1) When the test results indicate a module error
The Ethernet module RAM/ROM is faulty.
Check the buffer memory (E5
H) error code of the Ethernet module to take
corrective actions.
For the contents of error code, refer to Q Corresponding Ethernet Interface
Module User's Manual (Basic).