Specifications

4 - 15
Continued from the previous page
4) The Network parameters Setting the number of
MNET/10H Ethernet cards screen is displayed.
5) Set as follows.
Network type : Ethernet
Starting I/O No. : 00A0
(Start input/output signal of the Ethernet module)
Network No. : 1 to 239 (option)
Group No. : 0 to 32 (option)
Station No. : 1 to 64 (option)
Mode : Self-loopback test
6) Click the Operational settings button to display
the Ethernet operations dialog box.
7) Click the End button to close the Ethernet
operations dialog box.
The self refrain test operates even though the
setting details are arbitrary.
(In this textbook, the default values are used.)
8) Click the End button to close the Network
parameters Setting the number of MNET/10H
Ethernet cards screen.
This completes the parameter setting of the self
refrain test.
Next, write the setting details to the PLC CPU.