Specifications

4 - 11
(a) Operational settings
Set the communication data code, the timing to start the OPEN processing,
and the local station Ethernet module IP address.
Item Setting details
Communication data code
Select whether the binary code or the ASCII code is
used for communication.
When the automatic open UDP port in the MC
protocol communication or no procedure in the fixed
buffer communication is used, the communication is
performed with the binary code regardless of the
setting.
Initial timing Set the open timing of connection.
IP address Set the local station IP address.
Send frame setting
Set the frame sent by the Ethernet module.
In this textbook, only "Ethernet (V2.0)" is used.
Enable Write at RUN time
Select enable/disable external devices to write data
while communicating through the MC protocol while
the PLC CPU is running.
POINT
The operational settings are common to each connection for the user on the
Ethernet module side.