Specifications

4 - 10
(2) "Network parameters Setting the number of MNET/10H Ethernet cards"
Settings for the Ethernet module to use as a network module are performed.
Also, it is the main screen for "Operational settings" and "Initial settings" to use the
Ethernet module.
Item Setting details
Network type Set Ethernet.
Starting I/O No. Set the starting I/O No. of the Ethernet module.
Network No.
Set the network No. for MELSECNET/H or MELSECNET/10 of
the Ethernet module.
Group No.
Set the group No. for MELSECNET/H or MELSECNET/10 of
the Ethernet module.
Station No.
Set the station No. for MELSECNET/H or MELSECNET/10 of
the Ethernet module.
Mode Set the mode of the Ethernet module.
Operational settings
Set the communication data codes and the IP address, etc of
the Ethernet module.
Initial settings *1
Set the common timer values for the TCP/IP communication
as well as for setting the DNS server in order to use the e-mail
function.
Open settings
Set the connection open processing settings and the settings
related to buffer memory usage when using fixed buffer
communication to communicate data with an external device.
Router relay parameter
(Routing information)
This setting is for communicating a data with external devices
connected to other Ethernet via a router.
Station No. IP
information (MNET/10
routing information ) *1
Set for communicating with PLC CPUs on other stations via
Ethernet or MELSECNET/H, MELSECNET/10.
FTP parameters *1 This setting is for using the file transfer (FTP server) function.
E-mail settings *1 This setting is for the e-mail transmission/reception.
Interrupt settings *1 This setting is for executing the interrupt program.
*1 Not used in this text book.