Specifications

3 - 1
CHAPTER 3 SYSTEM CONFIGURATION
3.1 Applicable Systems
The Ethernet modules can be used in systems to which the following descriptions
apply.
(1) Applicable modules and number of mountable modules
The following table lists the CPU modules and remote I/O stations where the
Ethernet module can be mounted and the number of mountable modules.
Applicable Module Number of modules that can
be mounted
Remark
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Up to 4
• Available only in Q mode.
• Up to 8 in total including
modules for MELSECNET/H
(*1)
CPU module
Q00JCPU
Q00CPU
Q01CPU
1 at max (*1)
Remote I/O station
QJ72LP25-25
QJ72LP25G
QJ72BR15
Up to 4
MELSECNET/H remote I/O
station
(*2)(*3)
*1 Refer to the User's Manual (Function Explanation, Program Fundamentals)
for the CPU module to be used.
*2 Refer to the Q Corresponding MELSECNET/H Network System Reference
Manual (Remote I/O network).
*3 Use the Ethernet module of function version B.
(2) Applicable base unit
The Ethernet module can be mounted in any I/O slot (*1) of the base unit.
*1 Limited within the I/O point range of the CPU module and remote I/O station.
(3) Applicable software packages
The following table shows the software packages available for the Ethernet
module.
(a) Software for PLC
Product name Model Remark
GX Developer SWnD5C-GPPW-E
MELSEC PLC programming software.
The "n" in the model name must be 4 or
greater.
(b) Communication support tool for external devices
Product name Model Remark
MX Component SWnD5C-ACT-E
Active X library for communication.
The "n" in the model name must be 0 or
greater.
MX Links SWnD5F-CSKP-E
DLL library for communication.
The "n" in the model name must be 3 or
greater.