Specifications

App - 70
Errors
(1) When a dedicated instruction ends with an error, the abnormal completion signal,
(D2) + 1, turns on and the error code is stored in the complete status area (S2) + 1.
Refer to the following manuals regarding the error codes, check the errors and take
corrective actions.
<Error codes>
4FFF
H or less : QCPU (Q Mode) User's Manual (Hardware Design,
Maintenance and Inspection)
C000
H or higher : Q Corresponding Ethernet Interface Module User's Manual
(Basic)
Program example
A program that reads receive data from the fixed buffer for connection number 1:
When the input/output signals of the Ethernet module are X/Y00 to X/Y1F