Specifications

App - 36
Appendix 2.3 Error code List
The following explains the error codes to be returned by the ACT control and by the PLC
CPU, intelligent function module, network board when using the MX Component.
(1) Error code to be returned by ACT control
The following indicates the error code to be returned by ACT control.
Error code Description of error Corrective action
0x00000000 Normal completion
0x01010002
Disabled error during RUN
Operation that should not be
operated during RUN was executed.
Execute after changing to the STOP status. *1
0x01010005
Sum check error
Sum check of packet is error.
Check the system noise.
0x01010010
PLC No. error
Communication cannot be carried
out with the designated station No.
Check the designated station No. in the communication setting
utility.
Check the station No. designated at ActStationNumber.
0x01010013
Other data error
Communication cannot be carried
out for some reason.
Confirm that the configuration of system is not the one without
support.
Confirm that the correct CPU type is set.
Complete a program and restart the DOS/V personal computer.
Contact with a call center of Mitsubishi Electric Corporation.
0x01010018
Remote request error
Executing the remote operation via
the separate path from the one
communicating.
Cancel the remote operation executing via the separate path.
0x01010020
Link error
Link communication cannot be
carried out.
Confirm that the reset operation is not carried out to the
communication target, control station (master station) or the station
passed by routing.
Confirm that the network parameter is set correctly.
0x01800001 No command error Not supported by the corresponding method.
0x01800002 Memory lock error Complete a program and restart the DOS/V personal computer.
0x01800003 Memory secure error
Complete a program and restart the DOS/V personal computer.
Complete other programs and secure a free memory.
0x01800004 DLL load error
Complete a program and restart the DOS/V personal computer.
Complete other programs and secure a free memory.
Reinstall the MX Component.
0x01800005 Resource secure error
Complete a program and restart the DOS/V personal computer.
Complete other programs and secure a free memory.
0x01801002 Multiple lines open error Complete a program and restart the DOS/V personal computer.
0x01801003 Open not executed Complete a program and restart the DOS/V personal computer.
0x01801005 Designated port error
Complete a program and restart the DOS/V personal computer.
Reinstall the MX Component.
0x01801006 Designated module error
Complete a program and restart the DOS/V personal computer.
Reinstall the MX Component.
*1: For using the network board, a timeout error may occur. Check the cable status.