Specifications

8 - 10
8.4 PING Test from Personal Computer
The PING test is performed from the personal computer that executed the exercise of
the MX Component to the CPU B side.
It is used to check that the initial processing of the Ethernet module on the CPU B side
is normally completed and that the personal computer and the CPU B side are properly
connected.
Before starting the PING test, turn on the powers of the PLC A1 to A5 and the PLC B1
to B5 and then put them into the STOP status.
Q61P
-A1
QX
42
QY
42P
Q64
AD
Q64
DA
Q02H
CPU
Personal computer
<PLC CPU A1 to A5>
Q61P
-A1
QX
42
QY
42P
Q64
AD
Q64
DA
Q02H
CPU
E71
<PLC CPU B1 to B5>
PING test executed!
Router
E71
IP address
192.168.1.1
IP address
192.168.1. 254
IP address
172.16.1. 254
IP address
172.16.1. 101
Refer to Section 6.4 REMARK for the operation procedure example on the personal
computer side.
8.5 Operation of Demonstration Machine
Refer to Section 7.5.