Specifications

8 - 7
Continued from the previous page
4) Set the following contents of the "Network
parameters Setting the number of MNET/10H
Ethernet cards" screen.
Network type : Ethernet
Starting I/O No. : 00A0
Network No. : 2
Group No. : 0
Station No. : Set the station No. for each
demonstration machine
(11 to 15)
Mode : Online
5) Click the Operational settings
button to
display the Ethernet operations dialog box.
6) Set the following contents, click the End
button, and then close the Ethernet operations
dialog box.
Communication data code : Option
(Communicates using
binary code regardless
of the setting.)
Initial timing : Always wait for OPEN
IP address : Set the IP address of
each demonstration
machine
(172.16.1.101 to
172.16.1.105)
Send frame setting : Ethernet (V2.0)
Continued to the next page
7) Click the Open settings
button to open the
network parameter Ethernet open settings screen.