Specifications

8 - 5
Continued from the previous page
12) Click the End
button to close the "Network
parameters Setting the number of MNET/10H
Ethernet cards" screen.
13) Click the
button.
(Overwriting the project)
14) Set Drive/Path and Project name, then click the
Save
button.
Drive/Path : A:
Q-E71
Project name : EX4-A
indicates a demonstration
machine No.
Example. For demonstration
machine No.1
EX4-A1
8.2.2 Sequence program
Use the same sequence program as that of Section 7.2.2.
POINT
After creating a sequence program, perform the following operations with GX
Developer.
1) Saving to FD
Drive/Path : A:
Q-E71
Project name : EX4-A
( indicates a demonstration machine No.)
Example: For the demonstration machine No.1, EX4-A1
2) Designating the connection destination (Refer to Section 5.2.3)
3) Writing to the PLC CPU (Refer to Section 5.2.4)