Specifications

7 - 20
Continued from the previous page
OFF
X
8
ON
7) After checking the I/O panel is completed, turn OFF
"X8" on the I/O panel on the sending side and
complete the data sending.
When executing the data sending again, execute
from Step 5).
OFF
XB
ON OFF
8) Switch "XB" on the I/O panel of the PLC A from OFF
to ON and to OFF again, then close the connection.
QJ71E71-100
RUN
INIT
OPEN
SD
ERR.
COM.ERR
RD
100M
9) After the connection is closed, the "OPEN" LED of
each Ethernet module turns off.