Specifications

7 - 18
7.4 PING Test Using GX Developer (Via CPU)
Execute the PING test using the GX Developer.
The PING test is used to check that the initial processing of the local station’s Ethernet
module is normally completed and the external device on the same Ethernet is
properly connected.
Before starting the PING test, turn on the powers of PLC A1 to A5 and PLC B1 to B5
and then put them into the STOP status.
Q61P
-A1
QX
42
QY
42P
Q64
AD
Q64
DA
Q02H
CPU
GX Develope
r
Q61P
-A1
QX
42
QY
42P
Q64
AD
Q64
DA
Q02H
CPU
E71
E71
192.168.1.101
192.168.1.201
<PLC CPU A>
<PLC CPU B>
Execute the PING test!
IP address
IP address
For the operation procedures, refer to Section 6.4 since the procedures are same.