Specifications

7 - 12
Continued from the previous page
4) Set the following contents of the "Network
parameters Setting the number of MNET/10H
Ethernet cards" screen.
Network type : Ethernet
Starting I/O No. : 00A0
Network No. : 1
Group No. : 0
Station No. : Set the station No. for each
demonstration machine
(21 to 25)
Mode : Online
5) Click the Operational settings button to display
the Ethernet operations dialog box.
6) Set the following contents, click the End button,
and then close the Ethernet operations dialog box.
Communication data code : Option
(Communicates using binary
code regardless of the setting.)
Initial timing : Always wait for OPEN
IP address : Set the IP address of each
demonstration machine
(192.168.1.201 to
192.168.1.205)
Send frame setting : Ethernet(V2.0)
Continued to the next page
7) Click the Open settings button to open the
network parameter Ethernet open settings screen.