Specifications

7 - 11
7.3 Ethernet Module Settings (PLC B1 to B5)
The Ethernet module settings on the PLC B1 to B5 side are performed.
7.3.1 Setting parameters with GX Developer
The Ethernet module parameters are set using the GX Developer.
The setting details should be the same as those of Section 7.1.
(1) Starting GX Developer and setting multiple CPU
Make the same multiple CPU settings as those of Section 5.2.1.
(2) Network parameters Setting the number of MNET/10H Ethernet cards
1) Double-click "Network parameter" from the project
data list.
2)
A
s the network parameter selection dialog box is
displayed, click the MELSECNET/Ethernet
button.
Continued to the next page
3) The "Network parameters Setting the number of
MNET/10H Ethernet cards" screen is displayed.