Specifications

7 - 5
Continued from the previous page
8) Set the following contents.
Protocol : TCP
Open system : Active
Fixed buffer communication procedure :
No procedure
Pairing open : Enable
Existence confirmation : No confirm
Host station Port No. : 0401
Transmission target device IP address :
Set the IP address of each
demonstration machine
(192.168.1.201 to
192.168.1.205)
Transmission target device Port No. : 0401
9) Click the End button to close the network
parameter Ethernet open settings screen.
10) Click the End button to close the "Network
parameters Setting the number of MNET/10H
Ethernet cards" screen.
11) Click the
button.
(Overwriting the project)
12) Set Drive/Path and Project name, then click
the Save button.
Drive/Path : A:
\
Q-E71
Project name : EX3-A
indicates a demonstration
machine No.
Example.
For demonstration machine
No.1 EX3-A1