Specifications

6 - 7
(2) Sequence program
For details on dedicated instructions, refer to Chapter 10 of Q Corresponding
Ethernet Interface Module User's Manual (Basic).
Drive/Path A:
Q-E71
Project name EX2-A
Open processing
Normally
ON
Connection
open
completion
signal
Connection
No.1 open
completion
Initial
normal
completion
signal
Connection
No.1 open
completion
Connection
No.1 open
request
signal
Connection
open
switch
Connection
open
request
signal
Connection
No.1 open
request
signal
Control D
(OPEN)
<Open connection using dedicated instruction >
Control D
(OPEN)
OPEN
instruction
completion
<Send data length is set >
Data sending
Initial
normal
completion
signal
Connection
No.1 open
completion
Send
switch
Send
flag
Send data
length
(BUFSND)
<Set the value from X0 to X7 to send data 1 >
Send data 1
length
(BUFSND)
<Set the value from X24 to X2F to send data 2>
Send data 2
length
(BUFSND)
<Send data using dedicated instruction >
Send
completion
Control D
(BUFSND)
Send data
length
(BUFSND)
Send flag
\
\