Specifications

6 - 3
6.2 Ethernet Module Settings on the Sending Side
The Ethernet module settings on the sending side are performed.
6.2.1 Setting parameters with GX Developer
The Ethernet module parameters are set using the GX Developer.
The setting details should be the same as those of Section 6.1.
(1) GX Developer startup and multiple CPU setting
Make the same multiple CPU setting as that of Section 5.2.1.
(2) "Network parameters Setting the number of MNET/10H Ethernet cards"
1) Double-click "Network parameter" from the project
data list.
2) After the Network parameter selection dialog box
appears, click the MELSECNET/Ethernet
button.
Continued to the next page
3) The Network parameters Setting the number of
MNET/10H Ethernet cards screen appears.