Specifications

5 - 35
Continued from the previous page
4) Click the Open
button to open the
communication line.
When opening normally, "Communication line was
opened normally." appears in Communication
status.
The error code appears at abnormal.
For details of error codes, refer to Appendix 2.3.
5) Double-click "
" of the bit device which value is
changed and turn it ON or OFF.
"
" indicates OFF, and " " indicates ON.
6) Input a numerical value to the text box of the word
device which value is changed.
The input numerical value is used as decimal
number.
7) Click the Write
button to execute writing.
Y70Y71Y72Y73Y74Y75Y76Y77
Continued to the next page
8) When the writing is completed normally, "Writing
was completed normally." appears in the
communication status.
Check the Y70 to Y77 LEDs of the I/O panel.
Check that the LEDs of the bit devices that are
turned ON in the program are ON.