Specifications

5 - 34
5.5.2 Operation of demonstration machine
The program is executed, and the device value of the PLC CPU is changed.
(1) Program screen
The following indicates object names on the program screen.
lblON_OFF(0)
lblON_OFF(7)
to
txtDvalue(0)
txtDvalue(4)
to
cmdMonitor
cmdEnd
txtStatus
cmdClosecmdOpen
(2) Operating procedure
1) Start up Visual Basic
®
and read the project file
(E71-2.VBP) shown in Section 5.5.1.
2) Check that ActLogicalStationNumber of
ActEasyIF1 property is "1".
The logical station number set in Section 5.3.1 is
set.
By setting the logical station number, the
communication can be performed with the path set
in the logical station number.
Continued to the next page
3) Click the
(start) button to execute the
program.