Datasheet

LTX-VCI Datasheet
LTX-VCI Iss1.05
RealTime Control Systems Ltd. Park House, Greenhill Crescent, Watford WD18 8PH. Tel [phone] Fax [phone] Page 9
Web: www.realtime-controls.co.uk , E-mail: [e-mail] LTX-VCI Datasheet Issue 1.05.01 12/07/2003 Doc No. 92101
Device Interface Sheet: Mitsubishi LMAP03-E
Manufacturer Mitsubishi
Device Name LMAP
Product Code LMAP03-E
Program ID 90:00:A2:00:76:00:03:03
Indoor Units 50
VCI Mode Number 21
LTX-VCI compatibility V1.05 or greater
Interface Functionality
Control Function Comments
Setpoint
Range restrictions may be applied by LTX interfaces
Fanspeed
LTX Mappings of 0 = LOW, 1 = MID2, 2 = MID1, 3=HIGH
Consult LMAP datasheet for mappings for units with fewer fan
speeds.
Run Mode
HEAT, COOL, AUTO and FAN_ONLY available
Louver
Not available
On/Off
Standard behaviour
Central/Local
Control
LMAP allows separate switching of On/Off, Setpoint and Mode
switches. The LTX-VCI will switch all as a single global setting
of Central or Local.
Readback Function Comments
Return air
temperature
Available
Heat-exchanger
temperature
Not available
Fault Code
Available – See following table for mapping to LTX ranges
Setpoint
Available
Fanspeed
Available
Run Mode
Available
Louver
Not available
On/Off
Available
Additional Functions Comments
Fault Reset
Not Available
Filter Reset
Not Available?
Configuration Notes
1) To use keypad lockout (prohibit) functionality, SW1-1 on the LMAP must be ‘ON’.