Datasheet

LTX-VCI Datasheet
LTX-VCI Iss1.05
RealTime Control Systems Ltd. Park House, Greenhill Crescent, Watford WD18 8PH. Tel [phone] Fax [phone] Page 8
Web: www.realtime-controls.co.uk , E-mail: [e-mail] LTX-VCI Datasheet Issue 1.05.01 12/07/2003 Doc No. 92101
The following mapping provides a list of the Mitsubishi fault codes that are reported individually
and the corresponding single byte codes that the VCI generates for these codes. In some
control systems the VCI code will be visible and manual translation will have to performed, in
others the supervisor software can be used to automatically map the VCI code to the original
Mitsubishi fault code so the native codes can be presented. Future versions of LTX controllers
will allow the original codes to be reported directly.
Note that the Mitsubishi LMAP02 (Firmware version 2.xx) does not return fault codes and only
provides a fault/no fault indication for each unit. To return detailed fault codes it is necessary to
use the Mitsubishi LMAP03 (Firmware version 3.xx), contact Mitsubishi for details. See the
Device Interface Sheet for the LMAP03 for details of the fault codes returned.
LTX-VCI Code
Decimal Hex
Fault Code
153 99 LTX Query Fail
201 C9 Fault (unknown)
255 FF No fault