Operating instructions

English-20

HDMI cable

DVD/HD IN

(Y·Pb·Pr, Y·Cb·Cr)

DVD/HD IN

(Y·Pb·Pr, Y·Cb·Cr)

AUDIO IN2 (RCA)

RGB1 IN (HDMI)

To D connector output

To video output

To HDMI output

To audio output

Audio cable (RCA)

Signal cable

(BNC x 3 to D connector)

BNC cable

(BNC x 3 to BNC x 3)

BNC – RCA adaptor

Connecting a video device (component video/HDMI device)

This monitor can be connected to a video device equipped with component output such as a DVD player.

Refer to the user’s manual of the connected device for details. (Cables shown in the ﬁ gure below are commercially available.)

• To connect a DVD player equipped with component output to the DVD/HD IN connector (YPbPr or YCbCr) on the monitor, use a

BNC cable (BNC x 3 – BNC x 3) and a BNC – RCA adaptor (commercially available), or a signal cable (BNC x 3 – D connector).

Select [DVD/HD] using the INPUT button on the monitor or the YPbPr button on the wireless remote control.

• To make audio connection, connect an audio cable (RCA) to the AUDIO IN2 connector or the AUDIO IN3 connector.

Select [AUDIO2] or [AUDIO3] using the AUDIO INPUT buttons on the wireless remote control.

• To connect a DVD player equipped with HDMI output to the RGB1 IN connector (HDMI) on the monitor, use an HDMI signal

cable.

Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control.

• For HDMI cable connection, select HDMI audio.

(You can select HDMI audio only when the video input is [RGB1].)

DVD player

(component device)

Front of LCD monitor

DVD player

(HDMI device)

P-4 Connection procedure (continued)

Left side of LCD monitor