Specifications

[Issue No.] GOT-A-0010-AB [Page] 9/41
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver. AB: December 2014 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
1) RS-232 cable connection diagram for a barcode reader manufactured by Nippon Systems Development Co.,
Ltd.
The following shows connection cables that must be produced by the user.
Maximum cable length: confirm with the barcode reader manufacturer.
Barcode reader
Cable connection and signal direction
GOT
Signal name Pin No. Pin No. Signal name
─ 1 1 CD
SD(TXD) 2 2 RD(RXD)
RD(RXD) 3 3 SD(TXD)
─ 4 4 ER(DTR)
SG 5 5 SG
DTR(ER) 6 6 DR(DSR)
CS(CTS) 7 7 RS(RTS)
RS(RTS) 8 8 CS(CTS)
SG 9 9 ─
3.2.4 System equipment (4)
Manufacturer Barcode reader Power supply unit RS-232 cable
IDEC AUTO-ID
SOLUTIONS
Corporation
QD2130-
□□
UL310-0515 CAB-350 *1
QD4130-
□□
MG1100i-1D HK-CP13-A05 8-0736-80 *1
PD7130-YB-PTR SET8-0935 CAB-433 *1
OPTOELECTRONI
CS CO.,LTD.
OPL-6845R-RS232 Included with a barcode reader Included with a barcode reader *1
Honeywell
International Inc
3800G-04E
An adapter must be purchased
separately.
Included with a barcode reader
*1: To connect the barcode reader to GT SoftGOT1000, connect the following USB/RS-232 conversion cables to a USB port
on the personal computer.
For the USB/RS-232 conversion cables, refer to Technical Bulletin FA-D-0036.
- DIFC-U2 (Diatrend Corporation)
- DAC01R2VD (Diatrend Corporation)
<Connection example>
[Barcode reader (RS-232)] + [
RS-232 cable] + [DAC01R2VD] + [DIFC-U2] + [Personal computer (USB)]