Specifications

[Issue No.] GOT-A-0010-AB [Page] 27/41
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver. AB: December 2014 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
6.2 Serial printer
You can use a serial printer by connecting to the built-in RS-232 interface of the GT16, GT15, GT14, or GT10,
or by mounting the GT15-RS2-9P on the GT16 or GT15.
To use a serial printer, install the extended function OS (Printer (serial)) to the GOT with the following screen
design software.
-
GT Works3 Version 1.17T
or later for the GT16 and GT15
-
GT Works3 Version 1.54G
or later for the G14
For the GT10 and GT14
,
install the standard monitor OS to the GOT with
GT Works3 Version 1.54G
or later.
The GOTs support printer control code ESC/P24-J84.
(Compatible Product)
Manufacturer Model Available hard copy size Reference
NADA ELECTRONICS, LTD.
TP-642EG *2 QVGA, VGA *1
Refer to (1) below.
TP-1728G *2 QVGA, VGA, SVGA, XGA
SEIKO EPSON CORPORATION VP-700U QVGA, VGA, SVGA Refer to (2) below.
*1: Since the printing width of the data is larger than the paper width, set the printer to “Do not print unprintable area.” or “Reduce and print
data.”
*2: TP-642EG or TP-1728G only supports the hard copy function.