Specifications

[Issue No.] GOT-A-0010-AB [Page] 22/41
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver. AB: December 2014 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
4.2.5 System equipment (5)
Manufacturer
2D code
reader
Dedicated cable
Power supply
unit
RS-232 cable
KEYENCE
CORPORATION
TL-30
Included with a 2D
code reader
TL-U1
GT16
Not required with the
extended function OS,
Barcode [04.00.**] or later
GT15
Not required with the
extended function OS,
Barcode [03.00.00] or later
Produced by the user with
the extended function OS,
Barcode [02.04.**] or
earlier
Refer to 1) below.
GT11
Not required
By using
Dedicated
cable, a 2D code reader
can be connected to the
GOT.
1) RS-232 cable connection diagram for a 2D code reader manufactured by KEYENCE CORPORATION.
The following shows connection cables that must be produced by the user.
Maximum cable length: confirm with the barcode reader manufacturer.
2D code reader
Cable connection and signal direction
GOT
Signal name Pin No. Pin No. Signal name
N.C 1 1 CD
SD(TXD) 2 2 RD(RXD)
RD(RXD) 3 3 SD(TXD)
N.C 4 4 DTR(ER)
SG 5 5 SG
N.C 6 6 DSR(DR)
CS(CTS) 7 7 RS(RTS)
RS(RTS) 8 8 CS(CTS)
N.C 9 9 NC