System information

Menu Data:
1. What’s the purpose of the Menu Data Feature?
2. Can I save my DVR’s menu programmed information?
3. Can I load a different DVR menu information to 2nd DVR and fine tune the second DVR?
Systems Menu:
1. What is the System Menu?
COM/LAN
1. What is the COM/LAN sub menu?
2. What does the RS-232 port support?
3. How do you connect multiple units together?
4. Does the DVR support DHCP?
5. What kind of network protocol is supported?
6. Is there any network software that comes with the product?
7. Does the DVR support web browser communications?
8. Why does the DVR reset when I change my IP address?
Hard Disk and other Memory Devices:
1. What is the minimum and maximum Hard Disk storage supported?
2. What kind of storage devices are supported?
3. Does the Hard Disk have to be formatted before installation?
4. Can any USB drive be connected to the USB port and work?
5. Can I partition the Hard Disk?
6. How do I add additional storage to my main recording area?
Network and Internet Information:
1. What kind of a network does the unit support?
2. Can I connect to the unit via Internet Explorer?
3. What is the operational difference between a web browser connection and DX-PC200
application software?
4. How do I copy needed data to my PC via my network connection?
5. Why does the DX-PC200 take over my desktop when I launch the software and how can I
get back my desktop?
6. What is the maximum bandwidth usage when connecting via DXPC200?
7. Is there a bandwidth throttle?
8. Is audio available via the network?
9. Can I control a PTZ camera via the network?
10. How many users can connect at one time?
11. How is priority set for control?
12. Is there a way if needed to disconnect all users and only allow one user to take over full
control of the unit?
13. Can I connect to multiple units via one PC and use one PC screen?
14. Is there more than one operational mode for the DX-PC200?
15. What is the Patrol function and how does it work?
16. Can I assign display patterns to function keys?
17. Is the DX-PC200 software simplex, duplex or triplex?
18. Can I assign specific cameras to display patterns?
19. Can I program the DVR via the network connection?