System information

• The maximum bandwidth used by the DX-PC200 is about 1MB.
7. Is there a bandwidth throttle?
• The DX-PC200 software does have a bandwidth throttle which allows you to fix the
amount of bandwidth that can be used. The lowest setting is 30k and the highest setting is
not limited.
8. Is audio available via the network?
• One way live audio is available via the PC200 software. No Playback audio is available at
this time.
9. Can I control a PTZ camera via the network?
• Yes, all PTZ cameras connected to the DVR, once configured can be controlled via the DX-
PC200 software.
10. How many users can connect at one time?
• Up to 5 users can connect to the DVR using the DX-PC200 software. Up to 10 users can
connect to the DVR via the Web Browser.
11. How is priority for control assigned?
• Priority access is provided by the system administrator. If two users have the same access,
the first connected user has control.
12. Is there a way if needed to disconnect all users and only allow one user to take over full
control of the unit?
• For emergency situations, the DX-PC200 software has a special port that can bump off all
connected users and take over full control of the DVR.
13. Can I connect to multiple DVR’s via one PC and use one PC screen?
• Yes, with the DX-PC200 software you can connect to multiple DVR’s and display various
cameras on a single PC screen.
14. Is there more than one operational mode for the DX-PC200?
• DX-PC200 has two operational modes, Simple mode is easy to use with a fixed area for
video display and controls are laid out for ease of use. Full mode allows you to display
various windows over the desktop.
15. What is the Patrol function and how does it work?
• The Patrol function allows you to setup the DX-PC200 software to go through a tour of
various display patterns or even various DVR selected cameras.
16. Can I assign display patterns to function keys?
• Yes
17. Is DX-PC200 software simplex, duplex or triplex?
• DX-PC200 is Triplex. It supports recording, live view and also playback from any channel at
the local pc screen.
18. Can I assign specific cameras to display patterns?
• Yes