System information

3. Can I load different DVR menu information to 2nd DVR and make small unique changes the
second DVR?
• The DX-TL4716E uses the Menu Data to copy or save a DVR’s menu settings. Also, you can
also upload the settings to another DVR that has similar settings and just fine tune the 2nd
DVR for its unique settings.
Systems Menu:
1. What is purpose of the System Menu?
• The System Menu provides you access the Communication menu, the PTZ settings, the
Service information screen, the Restore function, the Memory settings and it allows you to
Clear Data from the various supported recording devices.
COM/LAN
1. What’s the purpose of the COM/LAN sub menu?
• The COM/LAN is the sub menu where you can setup the DVR’s various communication
settings like LAN IP address and associated address and the RS-232 protocol.
2. What does the RS-232 port support?
• The DX-TL4716E utilizes the RS-232 port for PC control of the DVR. This could be local or
remote control only. No video is sent out this port.
3. How do you connect multiple units together?
• DX-PC200 LAN/WAN software is available for the DX-TL4716E and allows you to access and
control multiple DVRs at the same time.
4. Does the DVR support DHCP?
• The DX-TL4716E supports Static IP address only.
5. What kind of network protocol is supported?
• The DX-TL4716E supports TC/IP protocol.
6. Is there any network software available for the product?
• DX-PC200 application software is available for the DX-TL4716E. This software is licensed
free and can be loaded to as many PC’s as needed. The DX-PC200 software supports only
Mitsubishi DVR’s.
7. Does the DVR support web browser communications ?
• The DX-TL4716E does support Web Browser communications.
8. Why does the DVR reset when I change my IP address?
• The DX-TL4716E comes with the default static IP address of 192.168.000.100. When the IP,
Subnet or Gateway are changed, the DVR resets enabling it to start using the new address.
Hard Disk and other Memory Devices:
1. What is the minimum and maximum Hard Disk storage supported?
• The DX-TL4716E can support two hard disk drives. At this time, supported HDDs are from
250Gb to 2Tb each, allowing up to 4Tb installed. HDD support is updated over time, and
updates can be applied to older units to support newer drives.