System information

• The DX-TL4716E has 4 Mode out and Call out rear terminals. In the Mode out mode, the
rear terminals are used to monitor the DVR activity of Recording, Playing, Low Memory,
Power, Alarm and LAN connection. When the DVR is set to monitor any of these modes, the
DVR will send out a TTL signal that can be used by an alarm panel to trigger and alarm or
notice condition. The CALL out terminals are used to monitor Normal, Alarm LPA and Copy2
recording. When the DVR is set to monitor any of these conditions and the threshold is met,
a warning on the monitor and a TTL output is sent by the DVR to an alarm panel to trigger an
Alarm.
4. How many levels of password are supported and what are they?
• The DX-TL4716E supports 3 password levels. The first level locks out all functions except
for Password Lock release and Help button. The 2nd password level disables the DVR
functions except the following. Front of unit – Power, REC/STOP, and Timer. On Remote
controller – REC/STOP, and Timer button. Menu operations of SETUP Menu and System
Menu. The 3rd Level locks out Menu operations of SETUP Menu and System Menu.
5. How flexible are the multiplexer settings?
• The DX-TL4716E Multiplexer settings are very flexible. The DVR supports two monitor
outputs “A” and “B”. Both outputs can display multiple camera displays and support Triplex
operation of Live, Playback and REC. on a single multiple display screen.
6. What is the difference between the display of output A and output B?
• The only difference between output “A” and “B” is that Output “B” does not display the
DVR’s menu.
7. Can the display be setup to show an alarm camera in full screen then go back to previous
multiple display screens?
• The DX-TL4716E can be setup to switch from normal display to display an Alarm channel
and to go back to the normal display after the alarm.
8. What kind of options do I have to identify cameras?
• The DX-TL4716E allows you to name each camera, number the camera or not display any
camera ID.
9. Is there a way to set the unit back to factory’s original settings?
• The DX-TL4716E has a RESET to FACTTORY SETTINGS function which resets all menu
settings except for Time and Day, Local and Communication Password and User ID and Hard
disk partitioning are not changed.
Menu Data:
1. What is the ‘Menu Data’ used for?
• The DX-TL4716E uses the Menu Data to copy or save a DVR’s menu settings. For example,
after the DVR has been programmed and all settings are done, save the settings to a CD or
USB jump drive and you can reload the settings if the DVR is ever replaced or if someone
changes the settings. Also, you can also upload the settings to another DVR that has similar
settings and just fine tune the 2nd DVR for its unique settings.
2. Can I save my DVR’s menu programmed information?
• The DX-TL4716E uses the Menu Data feature to copy or save a DVR’s menu settings.