Specifications

13
Please Note:
You must use one of the factory modes. If the Auto button is not working, or the
NO SUPPORT message is shown on the OSD, you are not using a supported
resolution. If you are having difficulties selecting a supported mode, ask your
computer dealer, or the manufacturer of your graphics card for assistance.
The procedures described in this chapter should be performed for every
resolution and type of graphics signal that you wish to use. For example, if a
particular application requires a resolution of 800 x 600 pixels, but all other
applications use the monitor’s native resolution, you will need to display the
test pattern and make adjustments twice.
The monitor will remember your settings and use them whenever you turn the
monitor on. Note that you may need to re-adjust the monitor if it is connected to
a different computer or if the videocard is replaced.
Restoring the Factory Default Settings
To restore the factory defaults, press SEL/MENU to open the OSD, highlight
Advanced and then press the AUTO button. Select Factory Recall and press
AUTO to restore the default settings.