Specifications

6
6
Connecting the Display to your Computer
Using the VGA cable
1. Power off your computer.
2. Connect one end of the VGA signal cable to the LCD
Monitor’s VGA port. (See Fig 1-3)
3. Connect the other end of the signal cable to the VGA
port on your PC.
4. Make sure connections are secure.
Figure 1-3
Connecting the AC Power
1. Connect the power cord to the monitor. (See Fig. 1-4)
2. Connect the power cord to an AC power source.
Figure 1-4
Connecting the Audio Cable
1. Connect the audio cable to the Line Out jack on your
PC's sound card. (See Fig. 1-5)
2. Connect the other end of the audio cable to the LCD
Monitor's audio jack.
Figure 1-5
Instructions for VESA Mounting
To detach the LCD Monitor from its stand, unscrew the
two screws n for the monitor stand and pull it downwards
to remove, then unscrew the four screws o for the
monitor stand bracket and pull this down to remove.