User manual

9
CLICK Pro User Manual
v. 1.0
3 –STARTING UP THE SYSTEM
3.1 – Initialising equipment and software.
WARNING: for the system to work properly, you must observe the following order when
switching on the equipment.
– Steps to follow:
a) For SCSI connection switch on the printers and scanners first. Switching on the
printers first is more important if they use the SCSI bus to communicate with the rest
of the equipment. In this case, make sure that they are in ON LINE mode before
proceeding to the next step. If this procedure is not followed, switching them on once
the CLICK 5000 has started up will be useless.
b) Switch on the Image Processing Terminal (CLICK 5000).
c) After a few seconds, the CLICK Pro Main Screen will appear.
3.2 – Power–off
To switch off the equipment, use the “EXIT” icon on the main screen. The equipment will
switch off automatically. You may also switch off printers and scanners if you wish.