User manual

73
CLICK Pro User Manual
v. 1.0
4.11 – PRINT MANAGEMENT MODULE:
Print Server
4.11.1 – Introduction.
The Print Server module performs the Print out function for the CLICK Pro, and frees
the latter from managing and sending information through the SCSI or USB bus. This
program must be run to be able to print but, anyway, CLICK Pro launches it instead of
being launched from Windows start. To check that it is enabled simply click the
Windows
TM
(Task Bar) button and make sure that the following icon appears:
You can access the Print Server module via the Windows
TM
tool bar icon or clicking
the button located on Application Bar.
The Application Bar icon offers some short information about printing status, whithout
need of maximize Print Server program. Between squares will appear the number of images
that we have pending to print and, moreover, will appear a text showing the paper size of the
installed printer that have less remaining copies and the number of them. If it remains less of 20
copies, this text will be shown in yellow.
The led on the right top indicate the Print Server status, according to the following
colour codes:
Blue Æ Application not working.
Green Æ Application working.
Red Æ Application error. There is some problem to pay attention at.
4.11.2 – Checking Printer status.
Click on the Print Server icon to call up the program’s control screen:
What we can see now is the list of jobs and pictures sent to the printer and the status of each
one of them.