User manual

59
CLICK Pro User Manual
v. 1.0
If you have chosen scanning strips, you can insert them sequentially. Every time you have a
strip scanned, the progress bar will increment a step. To finish scanning strips, you have to
press Cancel button or wait scanning time out.
It is possible that during the scan process you were warned with a message like this:
You can choose not show the
message again (only for warning
messages).
To hide message, press OK button.
This message warns you that you have inserted the film with the emulsion down. This
means that you will obtain the scanned pictures mirrored, and the quality will be lower. In order
to obtain the best results you would have to cancel scan and insert the film again in the correct
position.
There are these other quality warnings:
Film tail first
: means that you have inserted the film starting with the tail, and it is possible that
the picture numbers were recognized incorrectly.
Lens/Light bar cleaning required:
means that you have dirty parts of your scanner, which can
affect the results. See users guide or contact your dealer to know how to clean the scanner.
After scan, the thumbnails of the images will appear at Pakon browser:
If the film has been retained into the scanner, you can expulse it
moving back or forward, using these control buttons. Don’t leave a
film in the scanner, because you will be warned to have film in
guides the next time you want to scan.