User manual

58
CLICK Pro User Manual
v. 1.0
Frames per strip:
Full roll
: Use this if you want to scan a full roll of images.
4, 5, and 6: chose one of them if you have strips of 4, 5 or 6 images, respectively.
Resolution:
Base 4
: use this to print up to L size.
Base 8: use this to print up to W size.
Base 16
: use this to print up to A4 size (F235 only).
Colour:
Negative
: check this to scan negative films.
Positive:
use this to scan positive films (F235 only).
B&W:
use this to scan Black and White films (F235 only).
Other:
Scratch Removal:
check this to enable Digital Ice™ scratch removal technology when scanning.
Enabling this, the scanning time will increase.
Lamp Warming:
if you want to obtain the optimum quality you must to check this. Be care with
F235, because its lamp warming can take a very long time, in order to obtain the best results.
Once you have chosen the options, click OK to start scan process.
A progress bar like this appears when scanner is making some action. Over it, it is showed a
message that you must follow. When starts scanning process you must wait while the scanner
is calibrating or warming up.
Don’t insert the film into the scanner until you have prompted:
At this point you can insert the film into the scanner. If you insert a full roll, you could want
wait for scan to finish, but it is possible to cancel the process when you want, by pressing
Cancel button next to the progress bar. You will obtain only the images scanned.