User manual

53
CLICK Pro User Manual
v. 1.0
If you access with the Advanced mode deactivated (see section 4.10.3 of the manual), the
following options will be offered:
Preview: It displays a preview box with a low–res image of a DIN–A4 size
scanning area.
Scan: This obtains the image through the scanner and adds it to the work folder.
The ‘Browser’ screen is then accessed.
Sizes: There are different output size formats for Print out: 10x15, 13x18, 15x23
and Other sizes. You therefore prepare the image proportionally to the hard copy to
be obtained. All formats are scalable and can be moved over the preview surface.
Switch between horizontal or vertical area.
4.7.1.2 – Advanced Mode
For all approved film scanners and flatbed scanners for CLICK Pro configured in
Advanced Mode the equipment will not work with the previous options, as the scanner
manufacturer's application will be activated. This provides greater control over scanning
parameters, albeit reducing ease of use. See the manufacturer's manual for instructions on
how to use the scanner.
Once you have scanned the image in Advanced Mode it will appear in the ‘Browser’
screen.
IMPORTANT NOTE: CLICK Pro is Twain compatible, to run in both Basic and Advanced
modes, but it depends on the scanner software TWAIN implementation.
WARNING: THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR
THE OPERATION OF THE EQUIPMENT IN CASE OF THE INSTALLATION
OF A SCANNER THAT IS NOT IN THE LIST OF APPROVED OR TESTED
SCANNERS.